Chlorination Accessories
Equa-Draw™ System
The Equa-Draw System automatically balances the flow from vacuum-manifolded gas supplies and provides for the equal drawdown of all manifolded containers. This innovative, patented system can be used to retrofit existing installations where un-equal withdrawal rates are a chronic problem or it is desired to upgrade to a vacuum manifolded configuration. Operation is automatic, requiring no operator monitoring or adjustment. The use of balancing rotameters is not required.
Additional Information      View PDF List
S2k Sonic Chlorinator
The S2k is a manually controlled inexpensive all vacuum solution chlorinator. It can be easily mounted directly to a 150 lb chlorine cylinder. Direct mounting means all vacuum operation. There are no lines or components carrying gas under pressure. A unique, self aligning captive-yoke clamp makes it easy to line up and connect the chlorinator to the gasket outlet of the cylinder valve. It offers a wide range of feed rates from 1.2 PPD to 100 PPD. It provides a 20:1 operating range. Feed rate is controlled by changing control-orifice area and/or interrupting injector water supply to shut off the operating vacuum.
View PDF
S10k Gas Chlorinator
The S10K Chlorinator is an all-vacuum operated, direct cylinder-mounted unit. It puts the vacuum-regulating valve right at the gas source and reduces gas pressure to a vacuum.
Additional Information      View PDF
V10k Gas-Feed System
Our V10K system is a remote vacuum solution-type feeder. Use it with four of the most common gases for disinfecting and treating municipal and industrial water and wastewater.
Additional Information      View PDF
V2000 Wall-Mounted Chlorinator
The Series V-2000 wall-mounted chlorinator is a more compact V-2000 than the floor-mounted unit with identical reliability and performance. The wall-mounted unit has capacity of up to 3,000 lbs. of chlorine per day.
Additional Information      View PDF
V2000 Floor-Mounted Chlorinator
The Series V-2000 floor-mounted chlorinator is available in a variety of configurations with capacities up to 10,000 lbs. of chlorine per day.
Additional Information      View PDF
Chlorination Accessories
Series 50-200 Evaporator
An electrically heated, immersed-tank heat exchanger to increase the rate of unaided gas withdrawal from multiple containers. Pre-wired at the factory.
Additional Information      View PDF
Chlorination Accessories
Series 20-057 Direct-Feed Chlorinator
This compact unit meters up to 300 lb. of gas per day directly into water. Cylinder pressure alone operates it - no electricity or water supply required.
Additional Information      View PDF
Chlorination Accessories
Series 50-204 Automatic Liquid-Changeover system
For use on ton containers, tank cars, and other large gas or liquid-chlorine supplies, this system gives automatic changeover to a fresh supply when the on-line supply runs out.
Additional Information      View PDF