Water and Wastewater Residual Disinfection
DEPOLOX® BASIC
The Depolox Basic residual analyzer provides low cost, dedicated monitoring of free or total chlorine residuals in drinking water applications. Using proven and universally accepted amperometric measurement technology, this analyzer directly measures chlorine residuals at 0 to 0.20 mg/l to 0 to 20 mg/l. I will forward picture latter.
View PDF
Analytical Equipment
MFC/Analyzer/Controller for Potable and Industrial Water Treatment Applications
“The MFC Analyzer/ Controller offers a broad combination of drinking water analysis and disinfection/chemical control in a single piece of equipment. Up to four water quality parameters, such as free and total chlorine, chlorine dioxide, ozone, fluoride, conductivity, redox, pH and temperature can be measured by a single or multiple wet sides. A variety of flow cells are available, including the proven Depolox ® 5 bare-electrode measuring cell for free chlorine and the VariaSens™ flow block for utilizing the proven membrane-type oxidant sensors. Integral control functions, such as flow proportional, direct residual, compound loop and set-point trim are standard for controlling the output of a chlorinator or metering pump to maintain a set desire level of disinfection and water quality.”
View PDF
Water and Wastewater Residual Disinfection
MICRO/2000® Analyzer
The Wallace & Tiernan Products Micro/2000 Residual Analyzer is the industry’s most versatile, accurate and reliable on-line instrument for continu-ous measurement of oxidant residuals. High accuracy and the ability to mea-sure low residuals down to 1 PPB bring a new level of efficiency to the disinfec-tion process regardless of the applica-tion. From potable water and wastewater treatment to cooling water, swimming pools and industrial processes, the Micro/2000 Analyzer helps you control your entire treatment process from pre-treatment using Potassium Permanganate, Chlorine Dioxide or Chlorine to distribu-tion residual monitoring of Chloramines or free Chlorine.
Additional Information      View PDF
Water and Wastewater Residual Disinfection
DEPOLOX® 3 Plus - Residual Analyzer
The Wallace & Tiernan Products Depolox® 3 plus residual analyzer continuously measures free or total (combined) chlorine in drinking water applications. Utilizing proven and universally accepted amperometric measurement technology, this analyzer directly measures chlorine residuals and provides an isolated 4-20 mA output signal for control or recording purposes. Integral alarm relays are included. The analyzer is also available in a dual input arrangement for measuring pH or fluoride, along with chlorine.
Additional Information      View PDF
Water and Wastewater Residual Disinfection
DEOX/2000® Analyzer
The Wallace & Tiernan Products Deox/2000 Dechlorination Analyzer is the most effective on-line instrument for accurate measurement of both SO 2 and total Chlorine residuals in waste-water plant effluent. With its "center zero" residual analysis capability, con-trol to an SO 2 setpoint is achievable and ensures complete dechlorination at a level to support compliance with dis-charge permits. Costly SO 2 overdosing is eliminated. The Deox/2000 uses a unique process to measure sulfite residuals. It is based on the principle of biasing the sample with an iodine source which is unaffect-ed by sample quality. With a stable "iodine bias", SO 2 or Cl 2 residuals are automatically determined from the measured amount of iodine reacted with the sample.
Additional Information      View PDF
New Product
TMS561 Turbidmeter
The TMS 561 is specifically designed for continuous on-line measurement of turbidity in filtered or raw water in municipal and industrial water treatment plants as well as final effluent in wastewater applications.
Additional Information      View PDF
Water and Wastewater Residual Disinfection
A-790 Amperometric Titrator
This Wallace & Tiernan ProductsTitrator is ideal for the precise measurement of chlorine residuals, including very low residuals, in municipal and industrial water and wastewater treatment for the calibration of on-line analytical equip-ment. It is also used at large swimming pools and in food plants, bottling plants, and research and development facilities to calibrate automatic residual-recording and control equipment. It is easy to understand and operate. This encourages frequent test-ing, makes for close control of the chlori-nation process. The unit is suitable for the residual tests in Standard Methods and ASTM METHOD D-1253.
Additional Information      View PDF
AIR - Chlorine, Sulfur Dioxide or Ammonia Gas
ACUTEC 35 Detector
Wallace & Tiernan Products’ Acutec 35 utilizes the latest on-line gas monitoring technology to provide a flexible and reliable, self testing detection system in a compact modular design.
Additional Information      View PDF